Monday, December 14, 2015

Go-Anywhere Gearing: SRampagnolo Drivetrain with 'Frying Pan' Cassette

Seven, Magilligan Point

For the past few weeks I've been riding with an experimental drivetrain on my main roadbike "Desdemona" (a Seven Axiom S).The goal of this drivetrain was to achieve very low (sub 1:1) gearing, for hilly long distance cycling, including brevets. There are several ways to get that kind of gearing, some of which I've tried in the past with mixed results. The tricky part is not the gearing in itself, but achieving it with a modern (i.e. integrated shifters), lightweight road drivetrain, while keeping everything working smoothly. At the moment no road group from Campagnolo, Shimano or SRAM is designed to handle gears quite this low, so modifications are needed.



A hybrid drivetrain means that the parts making it up (cassette, derailleurs, crankset and brake/shift levers) are not all from the same manufacturer or group.Since modern road groups are designed for all the parts to work together, modifying or mixing them is generally not advised. That said, there aretwo general methods of doing so in order to get low gears. One is to keep most of the group intact, except for the crankset - replacing it with either a triple, or a double with much smaller chainrings (either way, inevitably foreign to the group). The other is to keep most of the group intact, except for the cassette - replacing it with a wider touring cassette (and long cage derailleur to accommodate). Speaking purely for myself, I have not been 100% happy with what happens when a modern road group's native crankset is replaced with a foreign one. So this time around, I opted for the other method.After 600 miles, what impresses me is that, in addition to being useful, this is also the least finicky hybrid drivetrain I've tried to date.




SRampagnolo Drivetrain
The setup here is a "SRampagnolo" hybrid. We've kept the front end of my bike's native Campagnolo Chorus drivetrain (50/34t crankset, front derailleur and 11-speed ergo levers), but used a SRAM 10-speed 11-36t cassetteand a SRAM X9 long cage rear derailleur.




SRampagnolo Drivetrain
A Jtek Shiftmate (model #4 I believe) makes the SRAM 10-speed cassette compatible with the 11-speed Campagnolo levers. You can read all about this neat little converter here. Obviously, if you are starting with a SRAM or Shimano drivetrain, your setup will be different. Going with all-SRAM should be the easiest, because, as far as I know, their road and mountain groups are compatible. Shimano I am less sure about.





SRampagnolo Drivetrain

The decision to go with the SRAM X9 long cage derailleur was made, despite some reports that the new SRAM WiFli road derailleur (designed to handle up to a 32t cog) can in fact handle a 36t. Seven's Rob Vandermark tested the WiFli with the 11-36t cassette, and was not happy with the outcome. That was good enough reason for me to go with the X9.



SRampagnolo Drivetrain
As far as functionality of the drivetrain, there is not much to say other than "It works." The entire range of cogs, from 11t to 36t, is usable in both rings. Cross-chaining has not been a problem in either combination (the derailleur does not explode in big-big and the chain does not go slack in small-small). Chain drop has not been a problem.The fact that the shifters are 11-speed while the cassette is a 10-speed is not noticeable. The Jtek converter works flawlessly and does not call attention to itself. After 600 miles of using the entire range of gears and switching between big and small rings constantly (including under load, and including when cross-chaining) I have not yet dropped the chain, gotten the chain stuck between rings, or even mis-shifted. In all ways, the drivetrain functions as smoothly as it did when the original groupset was intact. To be honest, even in the best case scenario I did not expect it to work quite this well.




SRampagnolo Drivetrain
As far as usefulness of the gear range, this too has exceeded my expectations. The cassette is spaced asymmetrically, so that the smaller cogs are closer together and the bigger cogs wider apart. The exact combination is:11-13-15-17-19-22-25-28-32-36. With the 50/34t compact double, this combination almost feels like having two separate cassettes at my disposal: One for fast rides and the other with bailout gears for climbing either very long or very steep hills (or both!). Normally, I find myself riding in the big ring, in the middle of the cassette. One unexpected outcome of this, is that the setup encourages me to use bigger gears - something that has proven helpful over the past weeks of learning different climbing techniques and trying some interval training on flats. I was so focused on getting the low gears I wanted, it did not occur to me how much I would appreciate having the really high gears as well.The small cogs are not quite as tightly spaced as they would be on a racing cassette, but they are tight enough for me.



And of course at the low end of the range, the sub 1:1 ratio offered by the 34/36t combination is a dreamy bailout gear - especially considering how lightweight my bike is and how nicely it climbs in general. This end of the spectrum does come in handy on long rides over steep hills. For paved riding, this is now truly a go-anywhere bike.



While I expected the wide spacing to feel like a compromise, in practice it doesn't. On my dirt road bike, the spacing is tighter with a 12-29t Campagnolo road cassette. While my low gear on that bike is very similar to what is described here (28/29t with 650B wheels), on the high end it maxes out at 42/12t. I notice this more than I notice the difference in cog spacing.To be able to fly in 50/11t with my legs on fire and the next day spin up a vertical hill while humming happily in 34/36t,on the same bike,is, like, wow.



On the downside, the wide cassette does mean a bit of extra weight in the rear coming from the bigger cogs, long cage derailleur, extra chain length and Jtek pulley. Around 200-300g is the difference between this and my original drivetrain. Holding the bike up in my hands, it does tip to the rear a tad now, whereas before it was a masterpiece of perfect balance. In motion, I do not feel the extra weight. And whether it's bike related or not, my average speeds over the past few weeks here in Northern Ireland have been faster than previously. I really feel that I have the best of both worlds now with this bike.Since this is a temporary setup (an experiment for Seven Cycles, as much as for me - they may offer this option on custom builds in future), a different rear wheel was built for the purpose of testing it. I still have my bike's original Campagnolo wheel, derailleur and cassette, and can get my old setup back fairly quickly. But I think I will end up keeping this one, at least for the time being.



Visually, I admit the huge cassette does not exactly look elegant. The local roadies here have quickly dubbed it "the frying pan" and I've adapted the term affectionately. I may not be able to fry eggs on it, but I can can go far and I can go fast. Now we're cooking!

Saturday, December 12, 2015

The Bear Run trail run challenge




The welcome sign behind the barn - maps located here

I've lived in Southwestern PA all my life, but have yet to explore the trails of Bear Run Nature Reservein Mill Run. Its located on Route 381 between Normalville and Ohiopyle. I've had no particular reason for not going, I guess there were always other places being explored. Several climbing buddies even told me of some climbing that exists here. I always thought of checking it out as I sped by on the way to one of the normal destinations, but never did. This past spring Laura and I stopped and walked a short section of the trails while birding. I must say the birding was good, Hemlocks amazing, and the forested trails very inviting.





Yesterday I had to work in the morning but my afternoon was free. I wanted to go run and started discussing options with Laura. She brought up the idea of trying Bear Run. At Bear Run none of the individual trails are over 3 miles, but together they add up to about 20 interconnected miles. For the backpackers out there, they also offer a few campsites for overnight trips. Registration is easy right at the parking lot behind the barn. It was time to map an interesting route. I read a little about the trails online while Laura started getting out maps and books with additional information. After studying the options for a while, I settled on running the perimeter of the whole trail system. This run would end up being about 11.5 +/- miles and a great distance for some higher speed running. It looked easy to follow on paper, at each intersection, turn right. I'm not sure about other areas, but locally some trails are blazed and work well most of the year, but summer months can bring on thick vegetation which blocks the view of blazes and chokes out "established" trails turning them into navigational nonsense. I was hoping this wasn't the case at such a popular area.I pulled into Bear Run and parked in the lot at the trail head (TH) behind the main barn building. There are paper maps available right at the parking lot to help guide you on this journey if you feel like giving it a whirl. Being somewhat unfamiliar with the trails, I picked up two just in case one got ruined or lost. I really didn't feel like stumbling out at midnight on a short distance, training run. Especially since I was starting later in the day. The trails are mostly marked with upright posts at the intersections. They display the trail name and direction of travel arrows to make things easier...






Starting point of route, Registration Board at the trail head



Here's the route: Clock starts at the registration board - (TH) kiosk. Start on Arbutus, turning right onto Wintergreen, follow Wintergreen about a mile to the intersection with Warbler. At the end of Warbler, turn right onto Hemlock (a little chin scratching, blaze hunting was done several times on this one), follow Hemlock to a confusing downhill intersection at the campsite. (Hint) From the campsite basically make a quick switchback right onto the logging road (Bear Run trail.) Its blazed red/maroon, although you'll have to travel several hundred yards to find one. Many are hidden behind new growth along this section. Just after the turn you'll encounter some awesome boulders right on the trail (hint, hint to any climbing friends still reading).Follow the (I'm guessing seldom used?) Bear Run trail to the intersection with Tulip Tree trail (freshly blazed red), but unmarked I believe. Turn right and follow this incredible, rocky, freshly revamped trail to the intersection of Laurel Run trail. Follow Laurel Run trail all the way to a crossing at route 381. Cross the hardtop road and continue on Laurel Run to Peninsula trail. This intersection is tricky so pay attention or you'll add an out and back hill climb to your run too. Near the end of Peninsula trail, you'll come to Paradise Overlook (a rock outcropping that offers a view of the Youghiogheny River below. From there follow the trail uphill to a gravel road. Turn left onto the gravel road(Tissue trail)and follow it back to route 381. The entrance to Bear Run (the starting point) is across the road. Finish the run at the same sign where you began.






Paradise Overlook



My first try at this run was 1:47:21. I was off trail several times, referenced my map too much, stopped for a couple photos, yet ran my ass off to set a benchmark for myself and others. My experience was top notch and I highly recommend it to trail runners looking for new places to venture. Seemed like hard work despite its shorter distance. Route finding proved to be a little more difficult than I expected. Now knowing the route I look forward to trying this one again. There's some long moderate hills, short steep hills, high speed technical rocks on (my favorite part) Tulip Tree trail. Thick sections, Stinging Nettles, even an oozing deer carcass that currently requires a surprise long jump! All kinds of trail goodies. I really enjoyed the many types of forest , wildlife and vegetation that you encounter on this run. As I ran I identified birds by call to pass the time. I heard Black-throated Blue warbler, Black-Throated Green warbler, Wood Thrush, Veery, Rose Breasted Grosbeak, Scarlet Tanager, American Robin, Indigo Bunting, Field Sparrow, Eastern Wood Pewee, and Red-bellied woodpecker. Others were present I'm sure, these are what I remembered.




If you happen to try this one, please share your experience. I'm sure someone can run this much faster (I'm surely going to try). I hope to get other runners motivated to come give it their all. How fast can this be done? A friendly challenge if you will... Come try it, you won't be sorry! (printable trail map)












Friday, December 11, 2015

Treehuggers


I'll never let you go


I'm taking you down with me


He's rubbing her the wrong way


She's a little clingy

Happy New Year

Last night we stayed here at Thousand Trails to ring in the New Year. They had music and dancing in the parking lot. Nathan was tired from the tournament, and so we considered leaving early a few times. At Austin's insistence, we stayed until after midnight. We had so much fun.



We were able to spend some time gabbing with another FOTR that we just met. I first read about Greg on Rich and Donna's blog Florida Picklers, and asked Nathan who Greg was because I suspected they might be another FOTR. In typical male fashion, he didn't know.



As soon as I met Greg, I asked if he was the homeschooling dad and it was him. He has been down at the pickleball courts with us for the past week so I had some time to get to know him a bit. I met Cheryl and their three children Shayna, Josiah and JJ the next day and had lots of fun getting to know Cheryl.



Sadly, they headed out today so we will probably not see them for some time. You can read about their journey here: The Kalers



The moon had a beautiful ring around it and apparently it was a blue moon also. It was nice to have that special touch from nature to watch over us as we were spending time celebrating an event of something new.



Wishing our friends and family a Happy New Year!



May bring as much peace and joy to our lives as this past year has.



Living the life in Florida!

Friday, December 4, 2015

The Winter Carnival has Arrived!

Jasia has posted the 64th Edition of the Carnival of Genealogy, the topic this time around was Winter Photo Essay. Thirty contributors featured a variety of "winter" photographs. A chilly trip back in time to be sure, but heartwarming nevertheless.

The topic for the next edition of the Carnival of Genealogy is: "The Happy Dance. The Joy of Genealogy. Almost everyone has experienced it. Tell us about the first time, or the last time, or the best time. What event, what document, what special find has caused you to stand up and cheer, to go crazy with joy? If you haven't ever done the Happy Dance, tell us what you think it would take for you to do so."

This next edition will be hosted by yours truly, right here at kinexxions. The deadline for submissions is February 1st. Submit your blog article to the next edition of the Carnival of Genealogy using the carnival submission form. Please use a descriptive phrase in the title of any articles you plan to submit and/or write a brief description/introduction to your articles in the "comment" box of the blogcarnival submission form. This will give readers an idea of what you've written about and hopefully interest them in clicking on your link.
So that we genea-bloggers can plan ahead (yeah, right!) Jasia has provided a list of topics for future carnivals (in the lower left column at Creative Gene). Several dates are still available for hosting. If you're interested, contact Jasia.

The COG posters are a creation of footnoteMaven.

Washington Summer

Long term high pressure systems have surrounded the mountain, and after reading the forecasts, look to remain in the area. With July coming to a close, statistically the number of climbers on the mountain also begins to fall. Climbers looking for an experience of solitude in the alpine wilderness can come take advantage of the peace and quiet now. By climbing mid-week this time of year, even on some of the standard routes, the chances of meeting other independent parties on route is greatly reduced.

The late-snow season has left many of the routes in great shape. Climbers will find that the flowers and trails are just now starting to melt out in the alpine meadows. The "peak" of the flower season is still to come. On approaches, climbers have been seeing more Black Bears, Clark's Nutcrackers, and Elephant's Head than in previous years.

As the season progresses, different routes will start to see more traffic. The Mowich Face and the Tahoma Glacier are both routes which stay "in," well into September, along with the standard routes - the DC and EW. Welcome to Remember to bring the sunscreen!

Thursday, December 3, 2015

Po Campo Loop Pannier: a Ladylike Briefcase to Fit Any Bike

Po Campo is a small Chicago-based company that has been making a variety of bicycle-compatible women's handbags since . This year they introduced a larger, briefcase-like pannier to their lineup and I acquired one in trade a couple of months ago. The Loop Pannier is available in several floral patterns, but I opted for the more subdued waxed canvas version. It is umber with tan straps, metal buckles, and honey leather trim. At 14"x10"x3.5" the size is small enough so that there is no heel strike on bikes with short chainstays, but large enough so as to fit some laptops. These bags are designed to be used on the bike as panniers, off the bike as shoulder bags, and as luggage attachments while traveling.



The Po Campo attachment system consists of leather straps with sturdy metal clasps.When I saw this, it was one of those "why did no one else think of this earlier?" moments. The benefit of this design is that it can fit bicycle racks with any tubing diameter. Other quick-release systems max out at 16mm tops, which means that they will not fit some heavy-duty Dutch and Roadster racks. None of our other panniers are compatible with the monstrous tubing on this Pilen rack - but the Po Campo straps have plenty of room to spare.



While using the clasps is not quite as instantaneous as the sort of quick release where you lift up the handle and the hooks open up, it is still easy and quick.



Since the straps are soft and flexible, they also offer the benefit of being adaptable to the rack's layout. Some racks have complicated rat-trap setups that can interfere with typical pannier hooks. The Po Campostraps can simply be looped around them. The more I used this system, the more I began to appreciate the design. Those who dislike plastic hooks will also rejoice at the complete lack of plastic here; it's all metal.



There are two short straps integrated into the pannier, and a longer detachable shoulder strap. While initially managing the system of straps seems complicated, it ends up being very intuitive.



The long shoulder strap folds over the top of the bag. Then, the second of the short straps gets tucked into the leather handle attached to the first, which closes with velcro. This keeps all three straps neatly tucked in and away from the spokes.



When the bag is off the bike, it can either be handheld, or used as a shoulder or messenger bag. I prefer the latter, especially since adjusting the shoulder strap on the go is very easy - the adjustment buckle slides freely.



I have walked around with the bag as pictured for a couple of miles and it felt fine. I've also shortened the strap and have worn it over one shoulder, like a handbag. Either way is pretty comfortable and the clasps absolutely do not catch on my clothing. It basically feels like a normal bag to carry, not like a bicycle-specific pannier.



Another feature of the Po CampoI appreciate is the way it is organised inside. There is a large main compartment, and a side compartment that they refer to as a "file/lock pocket." However, I use it for my laptop, which is a MacBook Air and is the perfect size for it. I use the main compartment for clothing, books, notebooks and my DSLR camera.



There are also three elasticised interior pockets that will each fit a wallet, phone, writing instruments, or even a small bottle of water.



The exterior pocket is quite roomy. It is especially useful for those times you need to remove a sweater or grab some water in traffic.



I tend to overpack whenever I leave the house, so this pannier is always bulging with stuff when I use it. Still, the structured design keeps it all looking neat and presentable.



The reflective strip along the back is nice for extra visibility.



I have tried the Po Campo pannier on five different bikes with different types of racks, and it works well on all of them. I cannot imagine a rack design with which this bag will be incompatible, and in my view that is one of its most valuable features. Other strong points include the durable construction, the professional look, and the ease with which the bag can be used off the bike. This is a small pannier and you will not be able to fit groceries in it; it is really meant as a briefcase/ professional bag and will accommodate only the smaller laptop models. But the compact size has the added benefit of preventing heel strike on bicycles with shorter chainstays.



All things considered, I only have one critical suggestion for Po Campo: Think about making a version for men. When I ordered the waxed canvas finish, I was hoping that the Co-Habitant could use it too. He was delighted that the bag fit the unusually fat tubing of his Pashley Roadster rack (no other quick-release pannier we've tried will fit it), but he thinks its shape is too feminine. While Po Campodesigns their products with women in mind, I think the versatile attachment system and the elegant briefcase construction of this pannier is too good not to share with the menfolk.

Wednesday, December 2, 2015

Paradise to Muir -

December 29th,

I just did a nice check on Camp Muir this morning. I left Paradise at about 9:00 a.m. It was a little chilly. I was really surprised how few skiers were actually out. Kudos to the brave soul who marched up the Nisqually and skied the chute solo. Style.

First things first. Attention everyone. There was a wicked layer of surface hoar that didn't get any sun action today before the clouds started rolling in. It's going to get buried. There are all sorts of facets in the snow in the top 20 cm. What's worrisome is that the surface hoar is growing on a layer of sun crust. Underneath the sun crust is another layer of facets. Check out the snowpit profile.


Click on the image for a better, more readable size.

Expect these faceted layers to remain intact on all aspects for a while.


So the rest of the trip to Muir was outstanding. Skiing was 7 out of 10, for the windswept snowfield, anyway. The new snow that is forecast should make the skiing even better.


One thing I want everyone to be aware of is what we call the "Ant Trap". Remember that sand pit that Luke got thrown into by Jabba? Well, this is kind of like that.

It's located right next to McClure Rock. Click that picture to the right and note the coordinates on the bottom of the photo: -121.724123 46.808050 (WGS84). Plug that into your GPS and avoid it like the plague.

Many people have been eaten by the Ant Trap and more than a few have broken bones because of it.

Things are looking good at Camp Muir, albeit there is a lot of snow. Remember you'll have to dig your way into the upper half of the middle toilet. So plan on a little shoveling before you are moved to use it!



Also, remember if you're coming up to climb, to stop at the Paradise Old Station (the A-frame in the upper parking lot) and self-register. You can also pay the 30 dollar climbing fee to the 'iron ranger' there as well.

A storm was quickly moving in, so I had to ski-dattle. Down at Paradise, the parking lot is completely full! Hundreds of cars and sledders.








December 23rd, - Sweet Turns at Paradise!

This is it. Finally our snowpack at Paradise is back to normal at 78 inches. The rain from the last warm spell has stopped and we have up to 18 inches of new snow that has consolidated and another 5 inches of pretty light snow on top of it.


I started up the road this morning after we opened it at around 08:00 am. The light on the mountain was absolutely spectacular. It was clear and there was a little bit of surface hoar when I went to the weather station this morning. Here was the weather obs:

High: 22 Low: 16 Current: 22 Precip: .02 New: Tr Total Snow: 78" Winds: N @ 3-4.

We had our morning chores to do, cones in the parking lot, bumping sign andbamboo in the snowplay area, then folks started coming in droves.
The snowplay area is open and the runs are fast. However, because there's relatively little snow, we can only put one run in. The lines are a little long. Remember to get out of the run when you've come to a stop!

About noon we headed up towards Pan Point. What's this? It's noon at Paradise on a sunny day and there's no tracks? Where are all the skiers? Gary Voigt was up making turns in upper Edith Creek below McClure.


We've been telling people for years that the right way up Pan Point is in the trees on the nose. However, sometimes I think you're better off just going up the gully. We should've. The south facing part of the nose of the ridge was a little wet and heavy. It was starting to crack as we got onto steeper ground >40 degrees.

Always evaluate your own avalanche conditions!


We crested the ridge and decided to head for the top of Pan Point at around 7200 feet.

I was still surprised to see no tracks up above us since we had such a late start and the Paradise parking lot was FULL.

Whatever, the more powder for us.


Well, the way down was fabulous. My favorite run is to cut underneath McClure Rock. It's a little less exposed to the cliff bands around Pan Point. I rarely find avalanche conditions out this far. However, I did notice a crown feature on those cliff bands back down towards Pan Point. East facing, steep, ridge top... no surprise.

However, out where we were, the snow was outstanding.

Once we hit the flats to the east of Pan point, we traversed down the top of Mazama Ridge until we got to a slope locally known as Bundy's Blunder. It's just upridge of Sluiskin Falls. There was some slide deposition on it from the sun action today. It was only 4-5", but wet and heavy. It was enough to carry us, so we traversed out a hundred yards to the right and merrily made sweet turns all the way to the Paradise Valley Road.

Here's the latest weather history comparison:

Date 12/23

Max Recorded Snowdepth at Paradise 166 inches

Year of Max Recorded Snowdepth at Paradise 1916

Historic Average Snowpack at Paradise 77.9 inches

Current Snowdepth at Paradise 78 inches

Percent of Normal 100.13%

Percent of Historic Max 46.99%

Average Hi Temp: 32

Today's Hi Temp 22

Average Lo Temp: 21

Today's Lo Temp 16


Come on up! It's good!


Where Was Your Bicycle Made? ...and Does It Matter?

Torch, DropoutsThere are those who object to bicycles built in the Far East (specifically, China and Taiwan*), and the objections tend to fall into three categories. First, it is possible to get very cheap (as in both inexpensive and poor quality) goods mass-produced in that part of the world. So "made in China/ Taiwan" is interpreted as synonymous with flimsy, "soul-less" production methods and low quality materials. Second, the same factories that practice these production methods typically also have labour laws that are considered inhumane by western standards: long hours, low wages, child labour, air toxicity. Finally, these factories tend to use environmentally unfriendly processes, dumping pollutants into the surrounding landscape. These concerns have, understandably, made some wary about buying products made in that part of the world, bicycles included. However, they have also led to overgeneralisations and misunderstandings that result in unfair prejudices.



Aside from the obvious point that Taiwan and China are not the same, one thing to keep in mind when considering where your bicycle was made is that geographical locations are not factories and knowing the country of manufacture alone does not tell you much. Certainly there are factories in Taiwan where flimsy, generic bicycle frames are mass-produced in poor conditions. But there are also factories that employ highly skilled artisans, use quality production methods and the best materials, pay working wages, and are environmentally friendly. Typically, one can easily tell the difference by looking at the end product. And the cost of manufacturing differs considerably, despite both types of factories being located in Taiwan.



Many of the best bicycle manufacturers today outsource at least some aspect of frame production to Taiwan. These include favourites such asRivendell, Retrovelo, Workcycles, Pilen, Soma,Surly andVelo Orange, among others.These manufacturers have close relationships with the "good" kind of factories there. The resulting products are indistinguishable from domestic products in quality, because the same processes and materials are used, and because the manufacturer's specs are followed with precision.



We tend to assume that outsourcing is a cost saving measure, but it may surprise you to learn that cost is not always the reason for turning to Taiwanese production. One very real problem, is that there is a shortage of European and North American factories capable of producing bicycle frames at high volume. This is an issue manufacturers almost inevitably run into when they begin to expand production. The remaining old-school builders are small and are often unable to expand their workspace, buy additional equipment, and hire sufficiently skilled employees. There are some factories in Eastern Europe - namely Poland and the Czech republic - that are more versatile and can handle medium volume, but it's still often insufficient. Short of establishing their own factories domestically from scratch at astronomical costs, going to the Far East can be the only viable option for manufacturers. Furthermore, some manufacturers complain that the domestic factories they've tried produce inferior work to the "good" Taiwanese factories, and claim that moving production to Taiwan is a means of improving quality.



All of this is not to "defend" Taiwanese production, but to give my readers a better sense of what it actually means, so that they can make more informed decisions regarding their own stance on this issue. Personally, I prefer it when a bicycle is made as part of a small production run, by hand, and within a culture that I have some personal connection to. It's just more interesting to me that way. But I have nothing against Taiwan or China per se, as long as the specific factory provides good working conditions, employs environmentally safe practices and uses high quality methods of production.



On a separate note, I also feel that manufacturers should clearly and truthfully disclose where and how their bicycles are made. If they are going to go the Taiwan route for the very legitimate reasons described, then they ought to "own it" and not obfuscate the fact. It annoys me to no end when manufacturers boldly state on their websites that their bicycles are "proudly built in European Country X" only to reveal in some obscure small print buried deep on their site that the frames are made in Taiwan, and what they really mean by "built" is "designed and assembled." It leaves a bad taste in my mouth when manufacturers come across as trying to hide or distort the facts in this manner.



What are your thoughts on the subject? Does it matter where, or how your bicycle is made?



---

*Edited to add in response to some of the comments: This post does not mean to imply that I believe the People's Republic of China and Taiwan to be politically similar, or to have the same labour and environmental standards. I include both countries here, because people do group them together under the "made in the Far East and therefore bad" label (interestingly, Japan is now exempt). And while factory conditions in Taiwan are typically better than those in China, the point of this post is that country does not matter. It is possible for a "good" factory to exist in China. It is not about labeling geographical locations as good vs bad, but about being aware of what process is used - regardless of location.

Patagonia Sun Hoody

One of the really fun things about winter alpine climbing is the amount of gear it takes. OK, one of the really annoying things about winter alpine climbing is how much gear it takes.



Because of that I am always looking for gear to make my fun..more fun.



Once in a while you come across something that is a total surprise and you wonder how you ever got along without it. Patagonia's R1 Hoody comes to mind. Patagonia's Sun Hoody is the easy to wear, base layer that is lighter yet than the R1 Hoody. And I am not a big fan of Patagonia clothing. Generally is is over priced imo and not very well tailored for the price point they ask.



But not the case on this one. Seldom do I find a useful piece of climbing clothing that I want on every climb winter or summer, rock or ice, but also a piece of clothing I want to wear every day...24 hrs a day. And this one I do. I really do. Admittedly I look like a dork in it but I LOVE this hoody! Wearing one as I type this as matter of fact. Yes, it is SICK...but these things rock!









I now own three of them and would own more if I could find them.

$65 @ full retail and so far I have only seen two colors...off white/silver and the ninja color, olive drab. Gotta love the military contracts!







Patagonia sez:



Men's Lightweight Sun Hoody $65 msrp

Breathable, fast-drying hooded top with 30 UPF sun protection for next-to-skin use.



A highly evolved second skin designed to maximize your time on the water. For simultaneous air conditioning and tough 30 UPF sun protection, the super breathable, fast drying Sun Hoody is made of lightweight polyester jersey. A 3 panel hood protects your head, a hip closure pocket keeps keys, wax and hand lines sorted, and we've added thumb loops at the cuffs for added coverage. Recyclable through the Common Threads Recycling Program.



Details

•Soft and supple polyester fabric with sun protection

•3-panel, self-fabric hood provides airy, ventilated sun protection

•Thumb loops at cuffs for added coverage and sun protection

•Zippered pocket at hip

•Flat seams reduce chafe

•4.3-oz 100% polyester jersey with 30-UPF sun protection. Recyclable through the Common Threads Recycling Program

•246 g (8.7 oz)

•Made in Vietnam.



Technology



The UV protection offered by this garment is rated “very good.” *



* When tested in accordance with Australian/New Zealand test methods AS/NZS 4399 or AATCC 183/ASTM6603/ASTM D6544.

Sunday, November 29, 2015

International Woman's Day - On Bicycle

[image via Miami University Russian Studies Department]

In honor of March 8th, International Woman's Day, I give you "Collective Farm Woman on Bicycle" by my favourite Soviet painter, Alexander Deineka.

["Woman Riding a Bicycle with Grasses" by Jerry Cooke ]

... and a real Soviet "commuter" farm woman from 1960. Too bad this holiday is neglected in the USA. In Vienna I got flowers!

Saturday, November 28, 2015

Small Tent Rocks

All over the Jemez Mountains are pointed rocks like these. Most are bigger than this. They are called tent rocks but to me they should be called teepees.

Traveling from Dublin to the Antrim Coast, with Luggage and a Brompton

Dublin-Belfast Luggage

I am staying in a remote area on the Antrim Coast in Northern Ireland, near the town of Ballycastle. Getting here from the suburbs of Dublin was quite something, though very much worth it in the end. I had with me three pieces of luggage: A suitcase on wheels, my fully folded Brompton bicycle sheathed in a cloth cover, and a Carradice City Folder bag that can also be carried as a shoulder bag. I am an average sized female with below-average upper body strength, and lugging these 3 things around on my own through the various segments of the trip was doable. I rolled the suitcase in my left hand, carried the Carradice across my chest messenger style, and carried the Brompton by the frame in my right hand. This last part was the most difficult for me. The Brompton weighs over 20lb and I can only carry it in one hand for so long, especially if I am also dragging other things at the same time. But again, doable.




As is probably obvious by the rolling suitcase, this is not the sort of trip where I planned to ride to the train station and to my destination upon arrival. I am not touring, but rather traveling with a bike, which I intend to use once I settle in. I will be here for a while, staying in the same place the entire time, and so I wanted to be comfortable, have plenty of clothes to change into, and have all the camera equipment I wanted with me. I thoroughly researched the transportation situation in advance and determined that for the last leg of my trip, a bus could drop me off within walking distance of the place I am staying despite its remoteness. There is also a local commuter train (DART) that stops just down the road of where I stayed in Dun Laoghaire and goes directly to the train station in Dublin. I was a little nervous of course that things don't always work out in reality as they should, but I had an emergency taxi fund just in case.




Enterprise

The main leg of the trip was taking the train from Dublin to Belfast. These leave from Connelly Station in Dublin and they run roughly every hour on weekdays. I knew that it was supposed to be hassle-free to travel to Northern Ireland. But I didn't expect that it would be quite this nonchalant. There was nothing about the ticket purchasing or boarding experience to indicate that we would be crossing a border. I simply bought a ticket to Belfast. No one asked me to show ID. No one asked why I was traveling there.




The train station itself was a remarkably calm place compared to other train stations I have been to in large cities. No pushing, no yelling, quiet, everyone incredibly courteous. A few people tried to help me with my luggage at various stages. I wasn't struggling with it, so I think the motivation might have been a sense of fairness - that they had none and I had three pieces, so they might as well carry some of mine to even it out.




Luggage on Train 1

On the platform I saw a man with a folding bike and a couple of large bags. He must have been watching me also, because when the train arrived he pointed to an entrance indicating that I should use that one. I did, and it contained a nice empty luggage compartment. I easily fit both my suitcase and my bike on the middle shelf. I then sat nearby with the Carradice bag on the floor next to me.




Once the passengers settled in and the controller checked everyone's tickets, a trolley cart was brought by selling food. I bought a hot tea, and the server asked whether it was okay to give me change in pounds sterling, since he was out of change in euros. This was the first indication that anything would be different at our destination.




Dublin - Belfast Train

The train from Dublin to Belfast proceeds mostly along the coast, and the views are beautiful. The sun even came out. I relaxed and felt pleased at how well everything was going.




An hour and a half later, the train broke down. We waited inside for 15 minutes as they tried to fix it, but were finally asked to disembark. It was then announced that we would be switching to a local service commuter train for the remainder of the journey, and that this train was waiting for us on a platform a short walk away, accessible by multiple staircases. An elderly lady beside me poked me with her elbow, winked, and said "Welcome to Northern Ireland."




I braced myself for the ordeal of multiple staircase climbs with a suitcase and a Brompton, but thankfully there were lifts, so it wasn't that bad. However, the commuter train was crowded with locals and did not have luggage compartments. I stacked my things in a corner near one of the exists, found a seat from which I could keep an eye on it, and hoped for the best.



At length we arrived in Belfast. I expected a busy station and a rush to get off the train, but there was neither. No one shoved me or even expressed annoyance at my things being piled in front of an exit. My suitcase was promptly placed on the platform for me by a huge hand whose owner I didn't even have a chance to glimpse, and I quickly grabbed the bike, worried that who-ever tried to help with it would try to pick it up by the (bottomless) bag.




Connoly Station, Dublin

The Belfast Central Rail Station is very small. There is a ticket stand, two tiny coffee shops, and two bank machines: one dispensing pounds sterling, the other dispensing euros. The one dispensing pounds was out of order. As luck would have it, I hadn't brought any cash in GBP, figuring I'd easily withdraw it here. So I bought a coffee, paid with a 20 euro note, and got the change back in pounds. A few others had the same idea and the coffee shop became the currency exchange booth.




Speaking as a visitor, it felt a little disorienting that there was nothing acknowledging a border between the Republic of Ireland and Northern Ireland, and yet there was suddenly a different currency system.A local radio station was playing, and in between songs the announcer said something like "the weather across the United Kingdom is beautiful today" and that too felt odd, since at no point had there been signs or announcements mentioning the United Kingdom.It's hard to explain, but the dichotomy feels confusing.




Luggage on Train 2


At the Belfast Central Rail Station, I bought a ticket for the local train to a place called Ballymena, which was the closest train station to my destination. These trains also ran very frequently, which impressed me given how sparsely populated County Antrim is. At the end of each train car, there was a section dedicated to bikes and baby strollers, with liftable seats. I easily stored my luggage there. The train route from Belfast to Ballymena is mostly inland, and there I saw saw some light industry and some farms. The landscape in this area looked a little stark compared to the Eastern coastline.




Up until this point it had been sunny, but as soon as the train stopped at Ballymena and I disembarked, it began pouring. Thankfully the Ulster Bus terminal was just across the road and it was covered. I carried my luggage there and found the Ballycastle bus stop. According to the schedule posted, the next bus was due to arrive in just 5 minutes. I was alone in the terminal except for a man in his 60s, who was pacing back and forth nearby. So far in Ireland, I have found it impossible to occupy the same space as someone else without ending up having a chat with them, and this was no exception. Within minutes I learned that the gentleman was a retired policeman who lived in the area and enjoyed a free bus pass on account of being a pensioner. Glancing at his watch, he gleefully announced that my bus was already late and that I was lucky if it showed up in the next half hour despite was the schedule said. "He's probably stopped for a sandwich, or having a chat with his mate," the man speculated cheerfully. However, the bus pulled up only a few minutes behind schedule.




Incredibly, it looked like I was to be the only passenger and the driver suggested that I simply toss my luggage onto the front row of seats. That is what I did, then sat down next to it.






We traveled 27 miles from the inland town of Ballymena to the coastal town of Ballycastle, as the weather alternated between glorious sunshine and dark skies with pelting rain. We passed mostly farmlands with lots and lots of baby lambs. Occasionally there was a village center, then back to lambs. They were beautiful and fluffy and I began to get sleepy counting them.




As we approached the coast, the driver asked me where I wanted him to stop. This sort of stunned me, but he assured me that he had nothing better to do and might as well take me to my door so that I didn't have to walk. As a dramatic view of the sea opened up in front of us, I told him the address and that is where he dropped me off.






And so finally there I was, with my suitcase, my Carradice bag and my Brompton, ringing the door bell of my new residence. At this point I was utterly exhausted. But all things considered I think the trip went well. I left Dublin at 7:40am and arrived at Ballycastle just past 12:30 in the afternoon. I managed fine with my luggage, and now here I am settled in and with my own bike on the Antrim Coast.




The transportation system in Northern Ireland is impressive as far as density of coverage and the frequency with which the local buses and trains run; I had not expected anything nearly this good. For anyone interested in traveling through County Antrim, you can definitely do so without the hassle of renting a car. Prices for buses and trains are reasonable, and the stops take you not only to local village centers but also to remote scenic locations along the coast such as the Giant's Causeway.Traveling with a folding bike should not be a problem, especially if it's one that folds up as small as the Brompton. For anybody considering visiting the Antrim Coast in this manner, I highly recommend it.